Samsung LH015I SERIES Installation Manual page 19

2. How to install
2-2 Installation Requirements (Mechanical)
- Support structure for Product Installation
The types of support structure may vary, because it is determined differently according to
the customers' taste and needs. Thus, spec all differs. Below items should be considered in
detail before is carried out.
1. Weight tolerances : Check whether the SET structure gets to be supported by the floor
or to be hung on a wall. Installation should be done considering the weight of the
product.
2. Environmental conditions : If the level of humidity and temperatures are high in the
surroundings, those conditions should be considered.
3. Locations : This product is for indoors, and should be located in a place where the
product is not likely to be affected by direct sunlight.
4. Ground stability
5. Front clearances: Check whether there are enough space and viewing angle in front of
the display to provide the most optimal impact to viewers.
6. Rear clearances : Needs to secure enough space to a worker in all kinds of structure.
7. Local regulations should be considered for each type of
Samsung Electronics LED Display Installation