Samsung LH015I SERIES Installation Manual page 21

2. How to install
2-2 Installation Requirements : Wall Mount Type
- When the support structure is fixed on the wall, make a big hole at the back of
the wall so that a worker can work at rear of set.
- When it is difficult to make a hole in the wall, apply a separate structure (ex:
wheel, hydraulic cylinder) on the set to enable moving the Cabinet.
- Check the status of the wall (Types, Thickness, Floor Plan)
- If the wall to have flat display installed is not flat, after , appearance quality may
become poor because the gap between the set widens.
- When the structure is installed in a pocket shape, the surrounding temperature
should be maintained below 35C degree and it is recommended to make more
than 10cm of space from the wall.
Samsung Electronics LED Display Installation