Kyocera 3051ci Quick Manual page 10

Finishing Tab- This screen allows you to give a the document a finishing feature such as stapling
folding, hole punch and gutters.
Stapling a Print Job
1. In the Finishing tab, click the Staple icon.
2. Select the position from available options.The position options vary
based on settings in Finishing edge, which provides custom staple locations
in the document.
If a folding unit is installed and Booklet is selected in the Layout tab,
Booklet (fold) is automatically selected. The job is printed in booklet
format and folded, with two staples placed in the binding.
3. Select the count for stapling: Under Count, select the number of sheets
for each stapled set, or select All to staple all sheets.
4. Click OK to return to the Print dialog box.
5. Click OK to start printing.
Printing with Tri-Fold
1. In the Basic tab, under
Destination, select Printer
default or Folding tray.
2. In the Finishing tab, click
the Tri-Fold icon
3. In Print side, select one of
the two options:
Inside
This selection prints on the
inside of the folded
document.
Outside
This selection prints on the
outside of the folded
document.
4. In Direction of fold, select
from the options available.
Left to right/Top to bottom
Right to left/Bottom to top
5. In Number of sheets, type
or select the number of
sheets that will be folded
6. Click OK to return to the
Print dialog box.
7. Click OK to start printing.