Troubleshooting - KitchenAid K45SS Use And Care Manual

ACCESSORIES
To Remove
1. Turn speed control to "O".
2. Unplug Stand Mixer or
disconnect power.

TROUBLESHOOTING

Please read the following before calling
your service centre.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of the
unit. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See "Beater-to-Bowl
Clearance".
3. Loosen accessory knob by turning it
counterclockwise. Rotate accessory
slightly back and forth while
pulling out.
4. Replace accessory hub cover. Tighten
accessory knob by turning it clockwise.
If your Stand Mixer should malfunction or fail
to operate, please check the following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit is
closed.
- Turn the Stand Mixer off for 10-15
seconds, then turn it back on. If the Stand
Mixer still does not start, allow it to cool
for 30 minutes before turning it back on.
- If the problem is not due to one of the
above items, see "Service Centres."
19