Engineering Mode - LG -A230 Service Manual

10.ENGINEERING MODE

Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided
by a handset. The key sequence for switching the engineering mode on is "1809#*230# "Select. Pressing END
will switch back to non-engineering mode operation. Use Up and Down key to select a menu and press
'select' key to progress the test. Pressing 'back key will switch back to the original test menu.
[1] Factory Mode
[1-1] Device Test
[1-1-1] Auto All Test
[1-1-2] Auto All Test Result
[1-1-3] Main LCD
[1-1-5] LCD Backlight
[1-1-6] Key Backlight
[1-1-7] Speaker
[1-1-8] Vibrator
[1-1-8] Vibrator
[1-1-9] Vibrator Duration
Camera
MicRcv
Key Press Test
SpeakerVibTest
[1-2] ELT Mode
[1-2-1] Automatic
[1-2-2] Manual
[1-3] SW Sanity Test
[1-3-1] FPRI Test
[1-3-2] DB Check
[1-3-3] E Serial NO
[1-3-4] UA.String
[1-3-5] Unlock SIM
[1-4] Factory Reset
[1-5] Version
LGE Internal Use Only
[2] Eng Mode
[2-1] Call Timer
[2-2] Eng Mode
[2-2-1] Band Selection
[2-2-1-1] Mattery Info
[2-2-1-2] LCD Info
[2-2-1-3] SD Card Info
[2-2-2] Remote Band
[2-2-2-1] Auto
[2-2-2-2] GSM 850
[2-2-2-3] GSM 900
[2-2-2-4] DCS 1800
[2-2-2-5] PCS 1900
[2-2-3] Battery Info
[2-2-4] Audio Tunning
[2-2-5] UART Setting
[2-2-6] BT Testing
[2-2-7] ERS & CoreDump
[2-2-8] SD Card Info
[2-3] Network Info
[2-4] Others
[2-5-1] Bluetooth Test Menu
[2-5-2] PS Attach Mode
[2-5-3] Packet Data Connection
[2-5-4] Module Test
[2-5-6] DRM Test Set
[2-5-7] MMS Test
[2-5-8] Auto Call Test
[2-5-9] Aging Test
[2-5-10] SIM Info
RPC Status
ICCID STatus
[2-5] Debug Setting
- 133 -
10.ENGINEERING MODE
Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes