Reload Adac Mac In Range Table - Avaya 3524gt Troubleshooting Manual

Figure 13: Correct filtering
Confirming port belongs to at least one VLAN
View information to ensure that the port belongs to a VLAN.
1. Use the show vlan interface info <port> command to view the details.
2. Note the VLANs listed with the port.
Disabling the VLAN filtering of unregistered frames
Change the unregistered frames filtering of the VLAN.
1. Use the vlan ports <port> filter-unregistered-frames enable
2. Ensure no errors after command execution.

Reload ADAC MAC in range table

Ensure the ADAC MAC address is properly loaded in the range table.
Troubleshooting
command to view the details.
IP phone is not detected
March 2013 53