Speakers - HP Pavilion x360 Maintenance And Service Manual

Speakers

Description
Speakers (includes cables and four isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
5. Disconnect the battery cable from the system board (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the speaker cables from the routing clips (2) and channel built into the base enclosure.
3. Remove the four Phillips PM2.5×5.5 shoulder screws (3) that secure the speakers to the base enclosure.
4. Remove the speakers (4).
NOTE:
Failure to properly install or damage to these isolators can result in degraded speaker performance.
Reverse this procedure to install the speakers.
34 Chapter 5 Removal and replacement procedures
When removing the speakers, make note of the location of the four rubber isolators (5).
Keyboard/top cover on page
Battery on page
Spare part number
807535-001
28).
33).