Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP Pavilion x360 Maintenance And Service Manual
Convertible pc 15-bk series (model numbers 15-bk100 through 15-bk199 and 15-bk000 through 15-bk099)
Hide thumbs
Also See for Pavilion x360:
- Service manual (98 pages) ,
- Maintenance and service manual (89 pages) ,
- Product end-of-life disassembly instructions (4 pages)
Table of Contents
Advertisement
4
Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
Case utility tool or similar plastic, flat-edged tool
●
●
Flat-bladed screwdriver
Magnetic screwdriver
●
●
Phillips P00, P0, and P1 screwdrivers
Torx T4 screwdriver
●
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
Using excessive force during disassembly and reassembly can damage plastic parts.
Use care when handling the plastic
Cables and connectors
CAUTION:
When servicing the computer, be sure that cables are placed in their proper locations during
the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat
the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught
or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables
tear easily.
Tools required
23
Hide quick links:
Advertisement
Table of Contents
