Authorizing Simatic Step 7 Via The Service Menu - Siemens SINUMERIK 810D Commissioning Manual

3.3.2

Authorizing SIMATIC STEP 7 via the Service menu

Requirements
The SIMATIC STEP 7 V5.3 SP2 software for SINUMERIK hardware is already installed.
Operator action
While the PCU is ramping up (after switching the controller off and then on again):
1. Select the Service menu [hidden menu entry] in the Boot Manager
2. Press key <2>: SINUMERIK tools and options
3. Enter a password for authorization levels 0 - 2.
X
Your Choice [1, 9]?
4. To authorize STEP 7, press key <1>.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
The main menu is displayed.
The system prompts you to enter a password:
The following menu is displayed:
PLEASE SELECT
1 Activate Step7 for PCU
9 Return to Main Menu
The system will then restart automatically.
STEP 7 will be authorized when Windows nexts boots before the HMI system software is
started.
Installing software and network operation
3.3 Network operation with the Service desktop
3-21