Siemens SINUMERIK 810D Commissioning Manual page 73

"Optional" start
The following steps are only applicable if you wish to change the default settings.
Here you can set the interface type, the network connection, the backup image path, and the
backup image split mode.
1. Set parameters for the Norton Ghost program:
Your Choice [1, 2, 3, 4, 5, 6, 7, 9]?
Notice
For the network connection described here the interface type must always be set to
LOCAL/NETWORK.
1. Change interface:
2. Establish/change network connection:
3. Change the backup image path:
4. Backup image split mode:
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
Press key <1>: Configure GHOST Parameters
The following menu is displayed:
PLEASE SELECT
1 Set Connection Mode PARALLEL (LPT:)
2 Set Connection Mode LOCAL/NETWORK
3 Change Backup Image Filename
4 Change Restore Image Filename
5 Change Machine Name (for Windows and DOS net)
6 Manage Network Drives
7 Change Split Mode
9 Back to previous Menu
Press key <2>: Set Connection Mode LOCAL/NETWORK and confirm.
Press key <6>: Manage Network Drives
Press key <3>: Change Backup Image Filename: Enter the complete path for the backup
file on the PG/PC, e.g. C:\SINUBACK\PCU\HMI.gho
Press key <7>: Change Split Mode
Choose whether you wish to split the backup image into portions and, if so, enter the split
size (max. split size: 2048 MB; default split size: 640 MB). The names of the split files are
assigned as follows:
4.1 Backing up/restoring data with an Ethernet connection
Backing up and Restoring Data
4-3