Displaying Your Own Boot Screen; Changing The Background Of The Service Desktop - Siemens SINUMERIK 810D Commissioning Manual

2.2.2

Displaying your own boot screen

Requirements
Set up a directory containing several boot screens (for different panel resolutions). This
directory should be segmented into subdirectories 640, 800 and 1024, which each contain a
boot screen of the appropriate resolution.
A directory containing boot screens can also be set up, likewise divided into subdirectories
640, 800 and 1024. The boot screen stored there for a particular resolution is displayed if no
boot screen (including one with a lower resolution) is found in the booting-screen directory
described above.
If no boot screen (including one with a lower resolution) is found, a general boot screen is
displayed, which is part of the PCU basic software.
Directories
The directories can be user-specifically set in ServiceCenter Users under:
● Startup: Bitmaps folder
● Startup: Default bitmap folder
2.2.3

Changing the background of the service desktop

Overview
A background pattern for the service desktop is not set via the "Control Panel" (system
control), but in the registry:
● Background pattern:
Key:
Value:
Date:
Init data:
Default data:
● Background image:
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
HKLM\SOFTWARE\Siemens\SINUMERIK\Basic software\ <version>\HMI desktop
Pattern (STRING)
<bit code>" (e.g., "0 80 114 32 0 5 39 2", see HKCU\Control Panel\Patterns)
"(None)" (= NO background pattern)
Background pattern previously set via the Control Panel
"(None)" (if entry is not available/readable)
A background screen for the service desktop is not user-specifically set via the "Control
Panel" (system control), but in the ServiceCenter Users under "Service: Bitmap Folders"
or "Service: Default Bitmap Folders".
Configuring the system
2.2 Configuring the operator interface
2-11