Serial Numbers; Cleaning And Maintenance - Peg-Perego Uno Instructions For Use Manual

at the same time (fig_b). Uno can be closed when the
Ganciomatic points are raised.
29 UNO + PRIMO VIAGGIO: to fasten the car seat to the
stroller: activate the brake on the stroller, remove the
hood, position the backrest in the middle position
and raise the Ganciomatic points. Turn the handlebar
to the side opposite the backrest, position the car
seat facing the handlebar and attach it by pushing
down until it clicks into place (fig_a). Ensure that the
handlebar is positioned on the side of the backrest,
pull out the front bar until the first click, position the
car seat facing the backrest and attach it by pushing
down until it clicks into place (fig_b). Always activate
the brake on the chassis or stroller before attaching
and removing the products (see the respective
instruction manuals). Check that the transport unit for
the child is attached correctly.
ACCESSORIES
30 RAIN CANOPY: Rain canopy which zips to the hood.
31 This rain canopy has been designed for use also
when the Uno stroller has the Primo Viaggio car seat
attached.
32 CHANGING BAG: bag with changing pad for the baby
that can be attached to the stroller.

SERIAL NUMBERS

33 Information relating to the date of manufacture of the
product are found under the UNO footrest.
_ Product name, date of manufacture and serial
number.
This information is required for any complaints.

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and
free of dust and sand and, if necessary, lubricate with
light machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge
and soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to
remove dust and wash by hand at a maximum
temperature of 30°C; do not wring; do not use
chlorine bleach, do not iron; do not dry clean; do not
apply solvent-based stain removers and do not dry in
a tumble dryer.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it
website www.pegperego.com
- 18 -
fax 0039/039/33.09.992