Gear Oil - Suzuki WagonR Manual

INSPECTION AND MAINTENANCE
CAUTION
• When installing the spark plugs,
screw them in with your fingers to
avoid stripping the threads.
Tighten with a torque wrench to
17.5 Nm (1.8 kg-m, 13.0 lb-ft). Do
not allow contaminants to enter the
engine through the spark plug
holes when the plugs are removed.
• Never use spark plugs with the
wrong thread size.
Spark plug gap "a"
NGK KR6A-10:
0.95 – 1.05 mm
7-12
CAUTION
When replacing spark plugs, you
should use the brand and type speci-
fied for your vehicle. For the speci-
fied plugs, refer
"SPECIFICATIONS" section at the
end of this book. If you wish to use a
brand of spark plug other than the
specified plugs, consult your MAR-
UTI SUZUKI authorised workshop.

Gear Oil

Manual Transaxle Oil/
Auto Gear shift Oil
When adding gear oil, use gear oil with the
appropriate viscosity and grade.
We highly recommend you use:
"MARUTI SUZUKI GEAR OIL 75W-80" for
manual transaxle gear oil or Auto Gear
Shift oil.
Manual transaxle oil (API GL-4)
60B307
75W-80
o
C -30 -20 -10 0 10
o -22
F -4 14 32 50
Gear Oil Level Check
Manual transaxle
to the
(1) Oil filler and level plug
To check the gear oil level, use the follow-
ing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine.
2) Remove the oil filler plug (1).
3) Check the inside of the hole with your
finger. If the oil level comes up to the
bottom of the plug hole, the oil level is
correct. If so, reinstall the plug.
4) If the oil level is low, add gear oil
20 30 40
through the oil filler plug hole (1) until
68 86 104
the oil level reaches the bottom of the
filler hole, then reinstall the plug.
57L71007
67L-74E
(1)
68KH073
67LH3-74E