Suzuki WagonR Manual page 97

Hide thumbs Also See for WagonR:
Table of Contents

Advertisement

OTHER CONTROLS AND EQUIPMENT
System Operating Instructions
Natural ventilation
Select "VENTILATION" and "FRESH AIR",
the temperature selector to the desired
temperature position, and the blower
speed selector to "OFF". Fresh air will flow
through the vehicle during driving.
Forced ventilation
The control settings are the same as for
natural ventilation except you set the
blower speed selector to a position other
than "OFF".
Normal heating (using outside air)
Select "HEAT" and "FRESH AIR", the tem-
perature selector to the desired tempera-
ture position and the blower speed selector
to the desired blower speed position. Set-
ting the blower speed selector to a higher
blower speed position increases heating
efficiency.
Quick heating (using recirculated air)
The control settings are the same as for
normal heating except you select "RECIR-
CULATED AIR". If you use this heating
method for an extended period of time, the
air in the vehicle can become contami-
nated and the windows can become misty.
Therefore, use this method only for quick
heating and change to the normal heating
method as soon as possible.
5-4
Head cooled/Feet warmed heating
Select "BI-LEVEL" and "FRESH AIR", the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully COLD position or fully HOT posi-
tion, the air that comes out of the center
and side outlets will be cooler than the air
that comes out of the floor outlets.
Normal cooling
Set the air flow selector to "VENTILATION",
the temperature selector to the desired tem-
perature position and the blower speed
selector to the desired blower speed posi-
tion, and turn on the "A/C" switch. Setting
the blower speed selector to a higher
blower speed position increases cooling
efficiency.
You can switch the air intake selector to
either "FRESH AIR" or "RECIRCULATED
AIR" as you desire. Choosing "RECIRCU-
LATED AIR" increases cooling efficiency.
Quick cooling (using recirculated air)
The control settings are the same as for
normal cooling except you select "RECIR-
CULATED AIR" and the highest blower
speed.
NOTE:
• To turn on the air conditioning system,
push in the "A/C" switch and set the
blower speed selector to a position other
than "OFF". With this "A/C" switch opera-
67L-74E
tion, an indicator light will come on when
the air conditioning system is on. To turn
off the air conditioning system, push the
"A/C" switch again.
• During operation of the air conditioner,
you may notice slight changes in engine
speed. These changes are normal, the
system is designed so that the compres-
sor turns on or off to maintain the
desired temperature. Less operation of
the compressor results in better fuel
economy.
NOTE:
• If you select "RECIRCULATED AIR" for
an extended period of time, the air in the
vehicle
can
become
contaminated.
Therefore,
you
should
occasionally
select "FRESH AIR".
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly
while you operate the air conditioner with
the air intake selector at "FRESH AIR"
and the blower at high speed.
Dehumidifying
Set the air flow selector to a desired air
flow selector position, the temperature
selector to the desired temperature posi-
tion and the blower speed selector to the
desired blower speed position. Also select
"FRESH AIR" and turn on the "A/C" switch.
67LH3-74E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents