Suzuki WagonR Manual page 74

Hide thumbs Also See for WagonR:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE
Auto Gear Shift
Auto Gear Shift is a 5-speed forward/
reverse transaxle.
Auto Gear Shift has the basic features of
conventional manual transaxle, but clutch
operation and transaxle gear shifting are
controlled electronically.
NOTICE
Do not depress both the brake pedal
and accelerator pedal simultane-
ously. This can cause damage or
overheating to the clutch.
NOTE:
When you open the driver's door, the Auto
Gear Shift systems run automatically and
you may hear an operating noise. This
sound does not indicate a malfunction.
The features are as follows:
EXAMPLE
R
N
-
D
M
-
+
67LM3002
3-8
EXAMPLE
R
N
-
-
M
D
M
-
+
+
67LM3003
Depress brake pedal indicator
76MH0A047
This light will come on if you do not
depress the brake pedal in the following
situations.
• When starting the engine.
• When the engine is on and the gearshift
lever is shifted from "N" position to "D",
"M" or "R" position.
• When the ignition switch is in the "ON"
position and the engine is off, the gear-
shift lever is shifted into any position.
This light will also come on if one of the
gears cannot be engaged and the system
is unable to re-try shifting when you shift
the gearshift lever from "N" position to "D",
"M" or "R" position.
Starting the engine
When starting the engine, always place the
R
gearshift lever in the "N" position and
depress the brake pedal firmly. The engine
cannot be started unless the gearshift
N
lever is in the "N" position and the brake
D
-
pedal is depressed.
If you parked vehicle with gear engaged on
last time (if you can see "1" or "R"), shift
into "N" (Neutral) and depress the brake
pedal. Hold the brake pedal while starting
the engine. You can hear buzzer in short
time.
Clutch operation
You can select either the Drive (D) mode or
the Manual (M) mode. Since this vehicle
controls clutch operation electronically in
either mode, you do not need to operate
the clutch.
Creeping function
This vehicle has a creeping function that
helps the vehicle to start smoothly by
engaging the clutch. When the gearshift
lever is in any of the positions "D", "M" or
"R", and you release your foot from the
brake pedal, the vehicle starts slowly with-
out depressing the accelerator pedal. The
creeping function is disabled if you depress
67L-74E
76MH0A056
67LH3-74E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents