Wall Mounting - Panasonic KX-NS1000 Installation Manual

4.2.11 Wall Mounting

The PBX can be mounted on a concrete wall using the optional wall mounting kit.
WARNING
•
Make sure that the wall that the unit will be attached to is strong enough to support the unit
(approx. 35 kg). If not, it is necessary for the wall to be reinforced.
•
Only use the wall-mounting equipment (anchor plugs, screws, metal brackets) included with
the PBX and the wall mounting kit. Make sure that the wall is made of concrete.
•
Be careful not to drop any components. Dropping components may damage them or cause an
injury.
•
Proper earthing (connection to earth) is very important to reduce the risk to the user of
electrocution or to protect the PBX from the bad effects of external noise in the case of a
lightning strike. (See "4.2.4 Frame Earth Connection".)
CAUTION
•
Make sure to install all necessary optional service cards in the PBX before performing the wall mounting
procedure. If it is necessary to install or remove a card, make sure to detach the PBX from the wall
before installing or removing the card.
•
Do not block the openings of the PBX. Allow space of at least 20 cm above and 10 cm at the sides of
the PBX.
•
Make sure that the surface behind the PBX is flat and free of obstacles, so that the openings on the
back of the PBX will not be blocked.
•
Make sure that the surface behind the PBX is not made of wood.
•
If the PBX is not installed properly using the securing correct methods, the PBX may fall causing serious
damage.
•
When placing the PBX onto the wall, make sure that the arrows on the metal brackets are pointing
upward. If the arrows are not pointing upward, the PBX may fall, resulting in injury.
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or plates
in the wall.
•
When this product is no longer in use, make sure to detach it from the wall.
Note
For details about dimensions and weight of the PBX, see "2.3.1 General Description".
Necessary Items
Included in the PBX
Screw B
Included in the wall mounting kit (KX-A247)
Top Bracket
Bottom Bracket
Anchor Plug (For use in concrete)
Screw A (For use in concrete)
4.2.11 Wall Mounting
6
1
1
4
4
Installation Manual 139