Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version,
follow the procedure below:
While starting up
PROGRAM
Select
"Maintenance".
SP-PHONE
Maximum Terminal Equipment with KX-NS300, KX-NS500, KX-NS700
The maximum number of trunks and extensions supported by each type of PBX is the same as when the unit
is used as a standalone unit. For details, refer to the Installation Manual of the corresponding PBX.
Note
For details about the maximum capacity of a One-look network, refer to "Maximum Terminal Equipment"
in "2.3.3 System Capacity".
SP-PHONE
Select
"Version display".
To exit the programming mode
Software version
HOLD
is displayed.
SP-PHONE
"AP Version".
HOLD
HOLD
2.3.3 System Capacity
HOLD
Installation Manual
75