Reh1Ov.kl Of Kvode-Cap - Sony KV-HR36M31 Service Manual

2-12. REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and
the anode cap to the metal chassis, CRT shield or carbon paint on the
C RT.
*REMOVING PROCEDURES
/
-
- 6
@
Turn up one side of the rubber cap in the direction indicated by the arrow
@
@
Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow
@.
@
When one side of the rubber cap is separated from the anode button, the anode-cap
can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow
O.
a
HOW TO HANDLE AN ANODE-CAP
@
Do not damage the surface of anode-caps with sharp shaped objects.
@
Do not press the rubber too hard so as not to damage the inside of anode-cap.
A
metal fitting called the shatter-hook terminal is built into the rubber.
@
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.