Siemens Simodrive 611 Configuration Manual page 59

2 System Configuration
2.7 Infeed modules
Hose cooling for a 1 tier configuration
Package 1 for a single module
Version for the Order no.
6SN1145–1BB00–0DAV
6SN1145–1BB00–0EAV
6SN1145–1BB00–0F AV
6SN1123–1AA01–0F AV
6SN1123–1AA00–0JAV
6SN1123–1AA00–0KAV
(Order No. 6SN11 62–0BA03–0AA1)
Fig. 2-7 System configuration with hose cooling (only for 300 mm wide modules)
2-58
Pipe cooling for a 2–tier configuration
Packet 2 for a 2–tier design
Version for the Order no.
6SN1145–1BB00–0DAV
6SN1123–1AA02–0F AV
(Order No. 6SN11 62–0BA03–0CA1)
The 2–tier design with pipe cooling is only permissible for the combination of
modules, order no. 6SN1145–1BB00–0DA
6SN1123–1AA02–0FA j at the bottom.
Note
DC link connection, refer to Chapter 9.1.3.
For connection details for the DC link adapter set, refer to the dimension
drawing in Chapter 12.
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
I/R
Minimum,
300 mm
PM
j at the top and
© Siemens AG 2012 All Rights Reserved
02.12
05.01