Sharp XE-A307 Service Manual page 15

(11) INSTALLING A PAPER ROLL (XE-A307)
The register can print receipts and journals. For the printer, you must
install the paper rolls (receipt and journal paper rolls) provided with the
register.
1) Remove the printer cover.
2) Lift up the print roller arm of the receipt side.
Print roller arm
3) Set a paper roll in the paper roll cradle of the receipt side as per the
diagram.
To the printer
Correct
4) Feed the end of the paper along with the paper positioning guides
as per the diagram.
5) While holding down the paper, slowly close the print roller arm of
the receipt side, and push down the arm until you hear a click lock-
ing the arm.
Paper positioning
guides
Note: If the print roller arm is not securely locked, printing is not done
right. If this problem occurs, open the arm, and close the arm
instructed above.
To the printer
Incorrect
XE-A207/A217/A307 INSTALL
– 13 –