Copy Protected Software - Toshiba T1100 PLUS User Manual

SOFTWARE
If you wish to be able to start
ette, follow the instructions
diskette.
2
Set the
3
Restart the
4
Put the blank, newly fonnatted diskette in drive
drive). Put the software diskette in the external
5 Type:
and press
diskette.
6
Label the new
DISKCOPY. You are ready to go to work.
If you do not have an external
do this for you.
I

Copy Protected Software

Software manufacturers sometimes use copy protection schemes to
discourage users from copying and reselling their products for profit,
and from distributing their products free of charge.
copy protection methods are used.
If you cannot find a particular software package in
check with your dealer. The popularity of the
growing, and it is possible that the software manufacturer can provide
you with a
It is also possible that the software manufacturer can send you a
diskette that is not copy protected. Many manufacturers are eliminating
copy protection schemes because they restrict flexibility and discourage
sales.
7(2
ON THE T1100
.
A B
PRT switch on
TIl 00
PLUS with the external drive attached.
COpy B:*.* A:
Enter. This creates your working copy of the software
3 1/2"
diskette and make a backup copy of it using
3 1/2"
version of the package.
TllOO
fonnatting a
B.
5 1/4"
drive, your dealer may be able to
3 1/2"
7
PLUS with this disk­
3 1/2"
system
A
(the current
5 1/4"
drive.
Many different
3 1/2"
fonnat, first
diskette fonnat is
-
-
-