If normal speed is selected, the
-
light. If fast speed is selected, the indicator shows a green light.
Whenever you tum the TllOO PLUS off and back on again, the system
goes to fast speed.
Selecting the Display
If you attach an external monitor to the TllOO PLUS, you need to use a
-
soft switch to deactivate the LCD and select the CRT. Press:
,
End.
To return to the LCD, press:
If a CRT is selected, the
Whenever you tum the TIl
selects the LCD.
Selecting Character Display
On the TIIOO PLUS characters can be displayed composed of a single
-
row of pixels (dots) or a double row of pixels.
At computer start up, the screen shows normal characters composed of a
double row of pixels and intensified (highlighted) characters composed
of a single row of pixels.
To reverse the character display, press the soft switch
+-+.
This causes the screen to show normal characters composed of a
single row of pixels and intensified characters composed of a double row
of pixels.
Ctrl + All +-+
Press
Chapter
5
OPERATING THE T11
Ctrl + All +-Home.
CRT
indicator shows an amber light.
00
PLUS off and back on again, the system
to return to the first character display mode.
Power/Speed
indicator shows a
00
PLUS
red
Ctrl + All +
Ctrl + All
5/19