Change Log; Firmware Version 1.0.10.39 - Grandstream Networks UCM6510 User Manual

This section documents significant changes from previous versions of the UCM6510 user manual. Only
major new features or major document updates are listed here. Minor updates for corrections or editing are
not documented here.

FIRMWARE VERSION 1.0.10.39


Added multiple modes support for inbound route. [INBOUND ROUTE: MULTIPLE MODE]

Added option "Enable Inbound Multiple Mode", "Inbound Default Mode" and "Inbound Mode 1" for
switching inbound route mode via feature code. [FEATURE CODES]

Added prepending prefix for inbound route. [INBOUND ROUTE: PREPEND EXAMPLE]

Added multiple registration per extension. [MULTIPLE REGISTRATIONS PER EXTENSION]

Added SIP Message support. [SMS MESSAGE SUPPORT]

Added 100rel option for 100rel support. [Table 95: SIP Settings/ToS]

Added video preview support. [Table 86: Internal Options/Payload]

Added User Portal Page Fax sending support. [USER PORTAL]

Added Fax intelligent routing. [FAX INTELLIGENT ROUTE]

Added Re-Invite with two media (audio, image) support for fax sending. [FAX WITH TWO MEDIA]

Added option "Max Concurrent Sending Fax" in Fax settings. [CONFIGURE FAX/T.38]

Added option "Fax Queue Length" in Fax settings. [CONFIGURE FAX/T.38]

Added Google Service Setting Support. [GOOGLE SERVICE SETTINGS SUPPORT]

Added Conference Schedule. [CONFERENCE SCHEDULE]

Added Setup Wizard. [SETUP WIZARD]

Added ability to customize specific prompt. [CUSTOMIZE SPECIFIC PROMPT]

Added option "ALL" when making backup file. [BACKUP/RESTORE]

Added "Enable Destination" and "Default Destination" in Follow Me settings. [FOLLOW ME]

Added "Call Duration Limit" option in web UI->PBX->Internal Options->General. [INTERNAL
OPTIONS/GENERAL]

Added "Enable Auto Email To User" option in web UI->PBX->Internal Options->General. [INTERNAL
OPTIONS/GENERAL]

Added options "ICE Support" and "STUN Server" in web UI->PBX->Internal Options->RTP Settings.
[INTERNAL OPTIONS/RTP SETTINGS]

Added payload type setting for VP8 in web UI->PBX->Internal Options->Payload. [INTERNAL
OPTIONS/PAYLOAD]

Added options "External Host" and "Use IP address in SDP" in web UI->PBX->SIP Settings->NAT. [SIP
SETTINGS/NAT]
Firmware Version 1.0.10.39

CHANGE LOG

UCM6510 IP PBX User Manual Page 18 of 339