Table of Contents
Advertisement
The left hand of the screen will display all available chap-
ters (songs) on the current disc up to a maximum of 30.
Scroll through these using the or keys and press the
ENTER key once you have selected a desired song. The
number of the selected song should then appear on the
right side of the same screen. Repeat the process for a
maximum of 30 choices.
5. Press the
or
keys until the cursor is over the word
"START". Clicking on ENTER will begin playing songs
in the order programmed.
In the event you wish to cancel programming actions during the programming process, use the
select the "RETURN" field at the bottom of the screen. This will allow you to exit this screen and cancel
unsaved changes.
When playing a programmed sequence, if the STOP key is pressed followed by PLAY, the player will start play
from the position you just stopped and ignore the programmed sequence. However, the programmed play list
is not erased, you can back to the programmed play by pressing the PROGRAM and Play keys, followed by
the START key while the programming icon is shown on the screen.
If you wish to cancel a programmed play currently running, just press the STOP key then remove the disc, all
program play data will automatically erased.
PD-200
6. If you wish to clear one selection from the program list,
select that song and use the
side of the screen to select "C" (clear) and press the
ENTER key. This will clear the song from the play list
and allow you to add a new one.
7. If you wish to clear the entire play list, follow the in-
structions above, but select "AC" and press the EN-
TER key.
9 Programmed Play
or
keys on the right
or
keys to
67
Advertisement
Table of Contents
