Memory Upgrade Procedures; Installing Memory Module - Gigabyte G-MAX N411 User Manual

TM
G-MAX N411 User's Manual

6.1 Memory Upgrade Procedures

Your notebook computer G-MAX N411 offers two memory slots
using 200-pin SODIMM (Small Outline Dual Inline Memory
Module) at least 128MB DDR SDRAM. One of them is for on
board memory module, you can use another to add and upgrade.
The memory compartment is located just under your notebook
computer G-MAX N411.
Based Memory
512 MB
512 MB
512 MB
512 MB

Installing Memory Module

Your notebook computer G-MAX N411 comes with standard
512MB of synchronous DDR SDRAM. You can increase system
memory to a maximum of 1024 MB in the system, by installing
one small outline double inline memory modules (SO-DIMMs)
with installed base memory in the system.
The 128MB, 256MB and 512MB memory module are available.
To install the memory module:
1. Make sure the system is powered off, the battery also is
removed and that no peripheral devices are attached.
2. Turn your notebook computer G-MAX N411 upside-down
and locate the screw that secures the DIMM door at the
underside of your notebook computer G-MAX N411.
Installing Memory
0 MB
128 MB
256 MB
512 MB
78
Total
512 MB
640 MB
768 MB
1024 MB