Table of Contents
Advertisement
To insert and remove a disc on the drive:
1.
Make sure your notebook computer G-MAX N411 is turned
on. Press the eject button found on the door cover of the
optical disk drive. The CD tray mechanism will pop-out
slightly and slowly pull out the whole length of the tray.
2.
Place the disc on top of the CD tray with the label side facing
up. Gently press the compact disc onto the center spindle to
secure the disc.
3.
To remove the disc, press on the center spindle and pull up
the disc from the side until the disc snaps out of the spindle
lock.
If the eject function is disabled by software or a power
failure occurs, the Emergency Optical Drive Tray Release
button allows you to manually remove a CD from the
drive.
4.
To close the optical disk drive, simply push the CD tray
inside. The optical disk drive LED will activate when the disc
is detected. Wait until the LED has turned off and then start
to read the disc.
There may be a protective sheet in the tray from when it
was shipped; please make sure it is removed before
operating the drive.
3 Introduction to Function
45
Advertisement
Table of Contents
