Fcc Compliance Statement - Epson Stylus TX130 User Manual

Storage: 5 to 85% RH
(without condensation)
Standards
Safety
UL60950-1
CAN/CSA C22.2 No. 60950-1
EMC
FCC part 15 Subpart B class B
CAN/CSA-CEI/IEC CISPR 22 Class B
Interface
Interface type
Based on Universal Serial Bus Specifications Revision 2.0
Electrical standard
480 Mbps (High-Speed Device)
Connector type
One Type B port

FCC Compliance Statement

For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
interference to radio and television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the
FCC Certification of this device and may cause interference levels which exceed the limits
112