Installing The Unit (In-Dash Mounting); Part List For Installation; When Installing Without The Mounting Sleeve; How To Remove The Unit - JVC KD-X342BT Instruction Manual

INSTALLATION/CONNECTION

Installing the unit (in-dash mounting)

Hook on the top side
Orientate the trim
plate as illustrated
before fitting.

When installing without the mounting sleeve

1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with screws (commercially
available).
Use only the specified screws. Using wrong screws might damage the
unit.
26
ENGLISH
Do the required wiring.
( 27)
Dashboard of
your car
Bend the appropriate tabs to
hold the sleeve firmly in place.

How to remove the unit

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key