Installing The Unit (In-Dash Mounting); When Installing Without The Mounting Sleeve; How To Remove The Unit; Part List For Installation - JVC KD-X330BTS Instruction Manual

INSTALLATION / CONNECTION

Installing the unit (in-dash mounting)

When installing without the mounting sleeve

1
Remove the mounting sleeve and trim plate
from the unit.
2
Align the holes in the unit (on both sides) with
the vehicle mounting bracket and secure the
unit with screws (commercially available).
Use only the specified screws. Using wrong screws might
damage the unit.
32
JS_JVC_KD_X330BTS_X33MBS_K_EN_1.indd 32
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Do the required wiring.
( 33)
Dashboard of
your car
Bend the appropriate tabs to hold
the sleeve firmly in place.

How to remove the unit

Part list for installation

(A) Faceplate (B) Trim plate
(C) Mounting sleeve (D) Wiring harness
(E) Extraction key
Output terminals
For 2-way crossover setting
KD-X33MBS REAR : Rear output
FRONT : Front output
SW : Subwoofer output
KD-X330BTS FRONT : Front output
REAR/SW : Rear/subwoofer output
For 3-way crossover setting
KD-X33MBS REAR : Tweeter output
FRONT : Mid Range output
SW : Woofer output
KD-X330BTS FRONT : Mid Range output
REAR/SW : Woofer output
29/9/2015 3:55:42 PM