3. Click Save to save the settings.
4. Click Save to Policy in order to save the client connections to a policy.
Password Setting
SCX allows the user to change the admin password for local thin client configuration.
Follow the steps given below to change the password for a selected device.
1. Click Configuration > Password Setting. A Password Setting page is displayed as shown in
the subsequent screenshot.
2. Enter the new password for the selected device in New Password text field.
3. Enter the new password again in the Confirm Password text field.
4. Click Save to save the new password.
SCX Tools
SCX provides various other features namely power control, VNC connector, send message, certificate
upload and firmware update.
Power Control
Power Control feature allows the user to control the power of managed systems using SCX agent
interface from anywhere in the network. The user will also be able to power on (through WOL), power
off, reset, issue power cycle reset operations on the managed systems. This feature allows the user
to save energy by turning off the systems when they are not used and turning the systems on when
they are about to be used.
Follow the steps given below to issue power related commands.
1. Click Tools > Node Power, a Power Control page is displayed as shown in the subsequent
screenshot.
Figure 80: Password Setting
78