Table of Contents
Advertisement
3. Type the required details in the respective text boxes for the respective protocol and click Save.
4. Select the required connection and click Edit to the particular connection.
5. Type the required details and click Save.
6. Select the required connection and click Delete to delete a particular connection.
Client Setup
Follow the steps given below to configure Connection Manager:
1. Click Configuration > Client Setting > Client Setup to configure client settings. A Client Setup
page is displayed as shown in the subsequent screenshot.
2. Select the required client options from the tabs namely Basic Setting, Appearance, Keyboard,
Clock & Language, IP Setting and Firmware Update.
Figure 78: Protocol – New
Figure 79: Client Setup
77
Advertisement
Table of Contents
