Structural Adhesive, Flexible Adhesives And Seam Sealer Locations - Fiat 500 Collision Awareness Manual

2012 FF
1 ­ LEFT WHEELHOUSE
2 ­ RIGHT WHEELHOUSE
3 ­ MASTIC PAD

STRUCTURAL ADHESIVE, FLEXIBLE ADHESIVES AND SEAM SEALER LOCATIONS

Structural adhesives, flexible adhesives and seam sealers should only be applied by trained technicians. Follow the
manufactures instructions for proper applications of products.
Structural adhesive is applied by itself or in conjunction with Squeeze Type Resistance Spot Welds and is to be re­as­
sembled in the same manner as vehicle build. Any situation where it is undetermined weather it is structural adhesives
or seam sealer always default to structural adhesive .
Anti­flutter adhesive is applied to areas of the vehicle where adhesive properties with flexibility are required. Typically
found on supports and braces throughout the closure panels, roof and body side gas fill areas.
Seam sealers are only to be used topically, never within weld flanges or hem flanges. All sealers being replaced should
duplicate the factory style sealer in shape and size.
For additional information on Corrosion Protection, (Refer to Collision Information ­ Standard Procedure), and Sealer
and Sound Description, (Refer to Collision Information ­ Material Locations).
Chrysler approved replacement materials include ­
• Structural Adhesives : Mopar #05083855AA, Fusor 112B, 3M 08116, or equivalent.
• Anti­FlutterAdhesives (flexible) :Fusor 121 (Flexible Foam), 3M 04724 (NVH dampening material), or equivalent.
• Seam Sealer : Mopar #04318026, Fusor 129, 3M 08308, or equivalent.
• Betamate Adhesive :Betamate Procedures, (Refer to Collision Information ­ Standard Procedure).
Fig. 54 Wheelhouses (Inner)
COLLISION INFORMATION 95