Sound Deadener Locations - Fiat 500 Collision Awareness Manual

2012 FF
Pumpable : A two component or one component sealer that seals interior and exterior joints and voids.
Resistance Weld­through : Sealer / adhesive that can be used in conjunction with resistance spot welding.
Sealer Tape : Preformed sealer.
Sprayable : Sealer applied with a pneumatic dispenser to duplicate original textured appearance.
Thumb Grade : Heavy bodied sealer for sealing large gaps and filling voids. Should remain soft and pliable.
Sound Deadeners
Non­structural Flexible Acoustical : Flexible foam with sealing and sound deadening properties.
Non­Structural Ridged Acoustical : Ridged foam with sealing and sound deadening properties.
Mastic Pads : Sound deadener pad that is preformed to fit a specific area.
Identifying Sealers
Several types of sealers and sound deadeners are used during assembly. Therefore, specific applications may not be
identified in this publication. General applications and the various types of products for repair will be featured to identify
and replace OEM sealers and sound deadeners.
Helpful Sealer Tips
• Check shelf life or expiration date prior to beginning sealer applications.
• Be sure "work time" is appropriate for sealer application.
• Temperature, humidity and thickness of sealer will affect the work, set and paintable times.
• Test fit replacement panels prior to installation to insure tight fit and proper seal.
• Equalize 2K Products according to adhesive manufacturer's recommendations.
• Always follow manufacturer's recommendations for storage, usage and application to achieve best performance of
the product.

SOUND DEADENER LOCATIONS

DESCRIPTION
PUR FOAM LOCATIONS (500)
PUR FOAM LOCATIONS (CABRIO)
HOOD
DASH PANEL (OUTER)
DASH PANEL (INNER) 1 of 2
DASH PANEL (INNER) 2 of 2
COWL SIDES
HVAC
FLOOR (INNER)
DOOR / BODY SIDE APERTURE
ROOF
WHEELHOUSES
COLLISION INFORMATION
FIGURE
(Fig. 43)
(Fig. 44)
(Fig. 45)
(Fig. 46)
(Fig. 47)
(Fig. 48)
(Fig. 49)
(Fig. 50)
(Fig. 51)
(Fig. 52)
(Fig. 53)
(Fig. 54)
83