Frame Dimensions - Fiat 500 Collision Awareness Manual

2012 FF

FRAME DIMENSIONS

NOTE: Frame dimensions are listed in metric scale millimeter (mm). All dimensions are from center to center
of Principal Locating Point (PLP), or from center to center of PLP and fastener location.
VEHICLE PREPARATION
Position the vehicle on a level work surface. Using screw or bottle jacks, adjust the vehicle PLP heights to the specified
dimension above a level work surface. Vertical dimensions can be taken from the work surface to the locations indicated
were applicable.
INDEX
Under Body Dimensions
Under Hood
NOTE: Underbody cross and length point to point measurements are taken from an even plane (plum).
Fig. 13 Deck Lid Opening (Cabrio)
DESCRIPTION
COLLISION INFORMATION
FIGURE
(Fig. 14)
(Fig. 15)
19