Canon MF247dw User Manual page 483

Direct Connection Settings
Configure settings for Direct Connection. After configuring settings, you can connect to the machine directly and
wirelessly from a mobile device even without an access point or wireless LAN router.
Use Direct Connection
Select whether to use Direct Connection. You can select <Direct Connection Only> or <Wireless LAN/Direct Conn.
(Auto Switch)> when <Use Direct Connection> is set to <On> while the Wirelss LAN connection is enabled.
Make Direct Connection (Access Point Mode) (MF249dw / MF247dw)(P. 291)
Off
On
Direct Connection Only
Wireless LAN/Direct Conn. (Auto Switch)
<Menu>
Select <Direct Connection Only> or <Wireless LAN/Direct Conn. (Auto Switch)> when <Wireless
LAN> is selected in <Select Wired/Wireless LAN>
Time Until Direct Connection Termination
Set the time that the machine exits Direct Connection mode automatically. Can be set when <Use Direct
Connection> is <On>. Once the time set in <Time Until Direct Connection Termination> is reached,
communication between the machine and a mobile device is discontinued. Before starting a large print job, you
should set a long delay time or set the delay time to <0> (Off).
0 (Off)
1 to 10 to 60 (min.)
<Menu>
Termination>
Access Point Mode Settings
To make detailed settings, such as authentication and encryption, enter an SSID and network key to configure
settings. Can be set when <Use Direct Connection> is <On>.
Use Custom SSID
Off
On
SSID (1-20 Characters)
Use Custom Network Key
Off
On
Network Key (10 Char.)
Setting Menu List
*
<Network Settings> <Direct Connection Settings>
<Network Settings> <Direct Connection Settings>
Set time to disconnect
<Yes>
<Apply>
475
<Use Direct Connection>
<Time Until Direct Connection
<On>