Philips SBCSC368 Instructions For Use Manual page 3

A
4
3
2
1
9
B
3
4
2
5
1
13
12
5
6
7
8
7
8
6
9
DC 9V 10
11
A-1 Microphone -------------------------
A-2 Power light --------------------------
GB
A-3 Transmit light -----------------------
A-4 Power pushbutton ----------------
A-5 Microphone sensitivity -----------
A-6 DC power supply socket --------
A-7 Channel selection switch --------
A-8 Battery compartment cover -----
A-9 AC power adapter ----------------
B-1 Link light ----------------------------
B-2 Power light --------------------------
B-3 Extendable antenna ---------------
B-4 Loudspeaker ------------------------
B-5 Loudspeaker Volume control /
Off switch -------------------------
B-6 Charging base ----------------------
B-7 Belt clip ------------------------------
B-8 Channel selection switch --------
B-9 Battery compartment cover -----
B-10 DC power supply socket --------
B-11 AC power adapter ----------------
B-12 Audible warning switch ----------
B-13 Charging base light ----------------
B
ABY UNIT
high-sensitivity microphone
lights when unit is powered; flashes when batteries are low
lights when a sound is being transmitted
push this button to switch the unit on or off
set the level at which the microphone will pick-up sounds
plug mains adapter connector into this socket
select channel A or B (whichever has least interference)
unscrew and unclip to insert batteries
plug into AC mains socket and into DC power supply socket
P
ARENT UNIT
lights to show that both units are in touch with each other
lights when unit is powered; flashes when batteries are low
extend the antenna for optimal reception
provides clear sound
• set loudspeaker level;
• switches off the power to the unit completely
place unit in base to operate it on mains power and when batteries
are low
handy clip for carrying the unit
select channel A or B (same as Baby unit)
unclip to replace batteries
plug mains adapter connector into this socket
plug into AC mains socket and into DC power supply socket
sets audible link alarm on or off
lights when unit is in the base and charging
2