Intended Use; General Safety Rules - Ryobi RLT26CDS Original Instructions Manual

Safety, performance, and dependability have been given
top priority in the design of your grass trimmer.

INTENDED USE

The grass trimmer is intended to be used only by
adults who have read and understood the instructions
and warnings in this manual and can be considered
responsible for their actions.
The product is only intended for use outdoors in a well
ventilated area. For safety reasons, the product must be
adequately controlled by using two-handed operation.
The product fitted with the string trimmer head (and
appropriate guard) is intended for cutting long grass, pulpy
weed, and similar vegetation at or about ground level. The
product is not designed to be fitted with a Tri-Arc™ blade
or a saw blade.
The cutting plane should be approximately parallel to the
ground surface. The product should not be used to cut or
trim hedges, bushes, or other vegetation where the cutting
plane is not parallel to the ground surface.
WARNING
To reduce the risk of injury, the user must read and
understand the operator's manual.
WARNING
Do not attempt to operate the product until you have
read thoroughly and understood completely all
instructions and safety rules contained in this manual.
Failure to comply may result in accidents involving fire,
electric shock, or serious personal injury. Save these
instructions and review frequently for a safe operation,
and instructing others who may use the product.
WARNING
The product is not intended to be used by children
or persons with reduced physical, mental, or sensory
capabilities. Children should be adequately supervised
to ensure they do not play with the product.
Read all instructions.

GENERAL SAFETY RULES

■ For safe operation, read and understand all instructions
before using the product. Follow all safety instructions.
English (Original Instructions)
■ Some regions have regulations that restrict the use of
■ Do not allow children or untrained individuals to use
■ Never start or run the engine in a closed or poorly
■ Clear the work area before each use. Remove all
■ Wear full eye and hearing protection while operating
■ Hearing protection may restrict the operator's ability
■ Wear heavy long trousers, non-slip protective footwear
■ Secure long hair so it is above shoulder level to
■ Keep all bystanders, children, and pets at least 15 m
■ Do not operate the product when you are tired, ill, or
■ Do not operate in poor lighting. The operator needs
■ Keep firm footing and balance. Do not overreach.
■ Keep all parts of your body away from any moving
■ Do not touch area around the silencer or cylinder of
■ Always
■ Do not smoke when mixing fuel or filling fuel tank.
■ Mix and store fuel in a container approved for fuel.
■ Mix fuel outdoors where there are no sparks or flames.
■ Stop the engine and allow to cool before refueling or
■ Allow the engine to cool, empty the fuel tank, and
■ Always stop the engine, allow it to cool, and make sure
3
Failure to follow all safety instructions listed in the
manual can result in serious personal injury.
the product. Check with your local authority for advice.
the product.
ventilated area; breathing exhaust fumes can kill.
objects, such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the string head.
the product. If working in an area where there is a risk
of falling objects, head protection must be worn.
to hear warning sounds. Pay particular attention to
potential hazards around and within the work area.
and gloves. Do not wear loose clothing, short trousers,
jewellery of any kind, or use with bare feet.
prevent entanglement in any moving parts.
away. Stop the product if anyone enters the area.
under the influence of alcohol, drugs, or medication.
clear, unrestricted vision to identify potential hazards.
Overreaching can result in loss of balance or exposure
to hot surfaces.
part.
the product, these parts get hot from operation.
stop the engine
adjustments.
Wipe up any fuel spillage. Move 9 m away from
refueling site before starting engine.
storing the product.
secure the product from moving before transporting in
a vehicle.
before making any