Ryobi RLT26CDS Original Instructions Manual page 2

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Symbols Explanation
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand operator's manual before using
this product.
Wear eye, ear, and head protection when operating the product.
Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least
15m from the operating area.
To reduce the risk of injury or damage, avoid contact with any hot surface.
This guard is not intended for use with a toothed saw type blade.
Do not use blade on this product.
Rotational direction and maximum speed of the shaft for the cutting attachment.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded gasoline intended for motor vehicle use with an octane rating of 91 ([R+M]/2)
or higher.
Use synthetic 2-stroke lubricant for air cooled engines.
Mix the fuel mix thoroughly and also each time before refueling.
Squeeze the throttle lock and throttle trigger.
Press the primer bulb 10 times.
Set the choke lever to "Full" choke position
Set the choke lever to "Half" choke position
English (Original Instructions)
SYMBOLS
1