Use Wps With The Pin Method - NETGEAR D6220 User Manual

AC1200 WiFi VDSL/ADSL Modem Router Model D6220
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
The page displays a description of the WPS method.
5. Click the Next button.
By default, the Push Button (recommended) radio button is selected.
6.
Either click the button onscreen or press the WPS button on the right side panel of the modem router.
For two minutes, the modem router attempts to find the WiFi device (that is, the client) that you want to
join the modem router's main WiFi network.
During this time, the WPS LED on the WPS button router blinks white.
7. Within two minutes, go to the WiFi device and press its WPS button to join the modem router's main
WiFi network without entering a password.
After the modem router establishes a WPS connection, the WPS LED on the WPS button lights solid
white and the Add WPS Client page displays a confirmation message.
8. To verify that the WiFi device is connected to the modem router's main WiFi network, select BASIC >
Attached Devices.
The WiFi device displays onscreen.

Use WPS With the PIN Method

To use the PIN method to connect a WiFi device to the modem router's WiFi network, you must know the
PIN of the WiFi device that you are trying to connect.
To let a WiFi device join the modem router's WiFi network using WPS with the PIN method:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
Manage the Basic WiFi Network Settings
95