Table of Contents
Advertisement
Nighthawk AXE7300 Tri-Band WiFi 6E Router Model RAXE290
Use the WPS Wizard with a PIN number
To use a PIN number to connect a WiFi device to the your WiFi network, you must know
the PIN number of the device.
To use the WPS Wizard with a PIN number:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
A note explaining WPS displays.
5. Click the Next button.
The Add WPS Client page displays.
By default, the Push Button (recommended) radio button is selected.
6. Select the PIN Number radio button.
7. In the Enter Clients' PIN field, enter the PIN number of the device.
8. Click the Next button.
For four minutes, the router attempts to find the WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the
network without entering a password.
The WPS process automatically sets up the WPS-enabled device with the network
password when it connects. The router web interface displays a confirmation message.
Specify basic WiFi settings
The router comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the
factory. You can find the preset SSID and password on the router label.
Manage WiFi Settings
64
User Manual
Advertisement
Table of Contents
