Environmental Requirements; Frequently Asked Questions - Zte h560n Quick Start Quide

failed), you can access H560N through web configuration(address is 192.168.1.253) to
"Networking"->"Wireless Extender" item to configure it manually.
9

Environmental Requirements

Working temperature: 0 ~ 40 ℃
Storage temperature: -40 ℃ ~ 60 ℃
Working Humidity: 20% ~ 90% (non-condensing)
Storage Humidity: 5% ~ 95% (non-condensing)
10

Frequently Asked Questions

Q. Why can't I connect my computer to H560N by Ethernet port?
In AP mode(Both Router and Bridge), Ethernet port only can be used as WAN port. Only
wireless terminal can connect to H560N.
Q. Why my computer can't access internet when H560N work in extender mode?
In Extender mode, if the indicator LED is in red flashing, this mean H560N fails to connect to the
wireless router. In this case the terminals connected to H560N can't access the internet.
Q. How can I do if the computer cannot access the Internet after router
configuration?
A. Perform the following operations as required:
Verify that the Ethernet cables are properly connected to your H560N and the corresponding

indicators are lit.
 Log in to your H560N, and then select Left arrow in the home page from the menu. Verify that
the Internet WAN Status can obtain an IP address.
Q: Why cannot my laptop computer receive wireless signal?
A: Perform the following operations to handle the problem:
 If your wireless network adapter is a built-in one, verify that the wireless switch is enabled. It is
- 14 -