Zte h560n Quick Start Quide page 15

recommended to contact the computer manufacturer, or refer to the user' guides of your
computer.
 Perform the following steps to verify that the driver of the wireless network adapter is properly
installed and the wireless network adapter is enabled:
a. Right-click the My Computer icon, and then select Properties from the shortcut menu. The
System Properties dialog box is displayed.
b. On the Hardware tab, click Device Manager. The Device Manager window is displayed.
In the Device Manager window, if the mark before the wireless network adapter is green, the driver is
properly installed and activated. If there is a red cross before the wireless network adapter, the
adapter is disabled. Right-click the adapter, and then select Enable from the shortcut menu. If there is
a question mark or exclamation mark before the wireless network adapter, the adapter driver is not
properly installed. Reinstall the adapter driver. If the wireless network adapter is not in the list,
right-click any device, and then select Scan for hardware changes from the shortcut menu. You can
also reinstall the adapter.
 Perform the following steps to verify that the wireless service of your computer is enabled (this
procedure uses Windows XP as an example):
a. Right-click the My Computer icon, and then select Manage from the shortcut menu. The
Computer Management window is displayed.
Select Services and Applications → Services. The Services list is displayed.
b.
c. Check the status of Wireless Zero Configuration. If Wireless Zero Configuration is not
enabled, right-click it, and then select Enable from the shortcut menu.
 Verify that the wireless function of your H560N and SSID broadcast are enabled.
 Search for a wireless signal from a shorter distance to avoid signal weakness caused by
obstacles.
If no wireless signal is received, use another wireless network adapter to access your H560N. If it still
cannot be accessed, reset it to factory defaults, and then reconfigure it.
- 15 -