System Requirements - Zte ZXHN H108L Maintenance Manual

Identification
WLAN
Reset
ON/OFF
POWER

System Requirements

System requirements for the ZXHN H108L router are as follows:
 The user has already subscribed the ADSL or Ethernet service. The
service provider shall provide at least one legal IP address
(allocated either statically or dynamically).
 One or more PCs with 10/100M Ethernet Network Interface Card
(NIC).
 For wireless access, an external or built-in 802.11b/g/n wireless
adapter is required.
 To configure the system via the web page based interface, you
need a web browser such as Internet Explorer (version6.0 or
above), Netscape (version4.7 or above).
Description
To turn on / off the Wi-Fi.
This button is on the bottom of modem. In the power-on state,
you can restore the system to the default configuration by using a
thin needle to press this slot for three seconds or for three
executive times.
To turn on / off the power.
Power interface. Connect it to the power adapter.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 1 - Introduction
5