Philips FlexCare Platinum Connected Directions For Use Manual page 17

Easy-start
This Sonicare comes with the Easy-start
deactivated.
The Easy-start feature gently increases the power
over the first 14 brushings to help you get used to
the brushing with the Philips Sonicare.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly advance through the
Easy-start ramp-up cycle.
Activating or deactivating the Easy-start
feature
1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger or
sanitizer.
-
To activate Easy-start:
Press and hold the power on/off and mode
button for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been
activated.
-
To deactivate Easy-start:
Press and hold the power on/off and mode
button for 2 seconds. You hear 1 beep to
indicate that the Easy-start feature has been
deactivated.
Note: Using the Easy-start feature beyond the
initial ramp-up period is not recommended and
reduces Philips Sonicare effectiveness in removing
plaque.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly move through the
Easy-start ramp-up cycle.
17
English