Brushing Instructions - Philips FlexCare Platinum Connected Directions For Use Manual

12
English

Brushing instructions

2 Download the Philips Sonicare app from the
App Store or Google Play.
3 Confirm Bluetooth is switched on on your
mobile device before you open the app. Check
the settings on your mobile device to turn on
Bluetooth.
4 To connect the toothbrush to the app, turn on
the toothbrush by pressing either the power
on/off button or the brushing mode button.
Make sure the toothbrush is not on the charger
when you turn it on.
5 Open the Sonicare app.
6 Follow the Sonicare app instructions displayed
on your mobile device. The app automatically
connects with the toothbrush. If the toothbrush
does not connect, follow the troubleshooting
steps provided in the app.
Note: For optimal data capture keep your mobile
device close whilst brushing.
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing firmly to
make the bristles reach the gumline or slightly
beneath the gumline.
Note: Keep the center of the brush in contact
with the teeth at all times.
3 Press the power on/off button to turn on the
Philips Sonicare.