Installation - Haier HVS1200 Operation Manual

Automatic drum washing machine
Hide thumbs Also See for HVS1200:
Table of Contents

Advertisement

Available languages

Available languages

Installation

Connection of water inlet hose and washing machine
1. Place the water inlet hose nut on the
connector of the water inlet valve.
2. Slightly shake the water inlet hose nut
to see if it is tightly and properly fi xed.
Water drainage hose
• The height of the terminal of the water drainage hose should be between
80cm-100cm, the water drainage hose must be securely placed on the clip
on the back of the washing machine.
• Use the water drainage support supplied as an accessory for proper
installation of the water drainage hose. Fix the water drainage hose
support with waterproof string. Do not use an excessively long water
drainage hose and contract the authorized technician if the water drainage
hose needs to be extended. the water drainage hose should not be
extended more tha 250cm.(longer extension will result in concurrent water
infl ow and outfl ow). The diameter of the extension hose should be the
same as the original hose.
caution: water drainage hose must not be immersed in water.the original
and extension hoses should be tightly connected.
• The appliance is to be connected to the water mains using new hose-sets
and that old hose-sets should no be reused.
Connection of power supply
Check the following itemps before connection to the power supply.
• The socket conforms to the maximum power load (The maximum current load of the socket
and power supply cable should not be less than 15A).
• Power supply voltage conforms to the required value.
• The power supply socket and the plug of the washing machine should be compatible. If they
are not compatible, refer to a washing machine technician or a Haier designated service point
for power cable replacement. The washing machine should be connected to the earth before
use.
• Supplementary earth cable should not be necessary if the socket is connected to the earth.
• Supplementary earth cable should be installed on the upper back of the washing machine and
connected to an earth if the power supply socket has no earth connection.
Caution: the supplementary earth cable should not be connected to water or heating pipes.
Water inlet hose nut
Connector of water inlet valve
5 - EN
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvs1000

Table of Contents