Honeywell XYR 5000 series User Manual page 17

Honeywell Process Solutions
3.2.2.3 Continued
Rev. 8
July 2012
Wireless Dual Analog Input Interface Transmitter
Figure 3.5: WMT Transmitter View
Select Wireless Data Loss Test... from the popup menu.
The Wireless Data Loss Test window appears (Figure 3.6). The name of
the Transmitter being tested appears in the title bar in parenthesis.
Figure 3.6: Wireless Data Loss Test
In the top of the window, you can configure the test to run for a specified
amount of time. The longer the test, the more data the test will have to do
an evaluation. Type the length of time that you want to run the test and
click Begin to start. Once the test starts, WMT will reconfigure the
Transmitter's Transmit Rate to the fastest possible for the selected Baud
Rate. These rates are listed in Section 5.2. After the test has completed, it
will restore the previously configured Transmit Rate.
User Manual 11