Replacement Procedures
4.7
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-8 to 4-9).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by
1. Turn the computer upside down
2. Loose the screw securing KBD Holder.
3. Upside down the computer.
4. Open the display.
5. Remove KBD holder. Insert your finger into the slot between the KBD holder and the
6. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to
7. Disconnect keyboard cable.
Downloaded from
www.Manualslib.com
Keyboard
the frame and do not touch the keycap.
M2.0x3.0B
Flat BIND screws x2
keyboard. Then, lift up the keyboard cover to remove it.
remove it.
4-22Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
manuals search engine