Modem Troubleshooting; Procedure 1 Diagnostic Test Program Execution Check; Procedure 2 Connector Check And Replacement Check - Toshiba Satellite U300 Maintenance Manual

Troubleshooting Procedures

2.11 Modem Troubleshooting

To check if modem is malfunctioning or not, follow the troubleshooting procedures below as
instructed.
Procedure 1
Execute Modem test in the LAN/Modem/Bluetooth/IEEE1394 test program. Refer to Chapter
3, Tests and Diagnostics for more information on how to perform the test program.
If any error is detected, perform Procedure 2.
Procedure 2
MDC (Modem Daughter Card) is used as the modem for this computer. MDC is connected to
system board by connector CN31(Santa Rosa) or CN29(NAPA). And also, MDC is connected
to system and LAN board by modem cable. If modem malfunctions, the connection of cable,
board and module may be defective. Otherwise, they may be faulty.
Disassemble the computer following the steps described in Chapter 4 and perform the
following checks:
42
Downloaded from www.Manualslib.com
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check and Replacement Check
Diagnostic Test Program Execution Check
Connector Check and Replacement Check
manuals search engine
Satellite U300 and Satellite Pro U300 Maintenance Manual