Toshiba Satellite M20 Maintenance Manual page 139

3 Diagnostic Programs
04 Data Line Test Fail
05xx Mouse
04 PS2 Mouse Test Fail
Stick Point Test Fail
14xx IrDA Test
01 2400BPS Test Error
02 4800BPS Test Error
03 9600BPS Test Error
04 19200BPS Test Error
05 38400BPS Test Error
06 57600BPS Test Error
07 115200BPS Test Error
08 0.576MBPS Test Error
09 1.152MBPS Test Error
10 4.000MBPS Test Error
11 Connect time out
20xx IDE-HDD
01 Get Parameter Fail !
02 Write Pattern Error
03 Data Compare Error
04 Read Verify Error
05 Seek Error
Disk Controller Self Test
06
Failed
Disk Controller Test
07 unexpected interrupt
Failed
Disk Controller action
09
Test Failed
Disk dos not support
10
SMART
Disk read attribute
11
threshold error
64
Data Line Test fails.
PS2 Mouse Test fails.
Stick Point Test Fail
Failure with the infrared port or
the configuration program is not
executed.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
Failure with the infrared port or
the configuration program is not
executed.
Wrong test parameters are input
by user.
HD is damaged.
HD is damaged.
HD is damaged.
HD is damaged.
The HD controller is damaged.
The HD controller is damaged.
The HD controller is damaged.
Disk dos not support SMART
Disk read attribute threshold
error
3.11Error Codes and Description
As above.
Replace the mouse.
Check the mouse connection and
repeat the test.
Rerun the configuration program
or check the infrared port.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
As above.
Rerun the configuration program
or check the infrared port. Check
the master.
Reinput the correct parameters.
Send the HD for repair.
As above.
As above.
As above.
As above.
As above.
As above.
Change HD which supported
SMART and test again
Send the HD for repair.
Satellite M20 Maintenance Manual